OPEN
CLASS PINEWOOD CUP: THE OFFICIAL PINEWOOD WORLD CHAMPIONSHIP
OVERVIEW: THE OPEN CLASS IS THE CLASS FOR EXTREME BUILDERS.
PRETTY MUCH ANYTHING GOES AS LONG AS IT DOESN’T DAMAGE THE TRACK OR EXCEED THE BODY SPEC REQUIREMENTS.
NO FLAME IS ALLOWED. THE ONLY REAL DIS-QUALIFIER WILL BE IF IT WILL DAMAGE THE TRACK, OR FLY OFF
THE TRACK, OR HURT SOMEONE IN THE PROCESS OF RACING. PART
OF THE JOY OF PINEWOOD RACING IS THE ENJOYMENT OF BUILDING A CAR. EACH CAR CAN COMPETE IN THE PINEWOOD
WORLD CHAMPIONSHIP FOR ONE EVENT. A CAR BODY CANNOT BE RE-USED IF IT WAS ENTERED IN A PREVIOUS PINEWOOD
CUP. RULES AND
REGULATIONS
STAGING
- Cars are staged straight down the lane with the wheels pulled away from the center rail and body of the car.
- Entrants that are live have the option to stage there own cars.
- Two runs in each lane with the lowest total average time provides the winner.
- No running, touching, or stepping over the track.
- No touching the cars. (other
than to stage your own car)
- Must conduct yourself in an orderly manner.
BODY SPECS
- Any wheel base is allowed as long as it meets the dimensions
and race requirements.
- Original Axle slots and/or drilled
holes and extended wheelbases are allowed.
Height : Not to exceed 2-3/4" inches ( 7cm ) Length : Not to exceed
7" inches ( 17.8 cm ) Weight : Not to exceed 5.00 ounces ( 141.747 grams ) Width : Not to exceed 2 3/4"
inches ( 7 cm ) Center Rail Height : 1/4" inch ( 7mm ) Center Rail Width : 1 5/8" inches (4.2 cm)
NOTE: Center Rail height and width are the actual measurements of the track, so you must build the
car to clear these dimensions for the wheels to ride on the track, outside of the rails, the car must not ride on the inside
of the rails. The height and width must be followed to avoid hitting the car in the next lane and to avoid
hitting the scoreboard/timing electronics at the bottom of the track.
1.
BODY AND PINEWOOD KITS ALLOWED
- The main
part of the body may be of any material. Additional materials maybe added as long as the meet the race
requirements and are firmly attached and conform to the body specification requirements.
- No parts can protrude in front of the starting peg.
- Any kit is allowed
as long as it meets the race requirements
2. AXLES
- All axle types are allowed as long as they meet the race
requirements.
- Axles may be polished or reshaped to allow for faster
wheel spin but must remain to the race requirements.
- Bushings,
bearings, sleeves, inserts attached to the wheels, and other such items are allowed.
3. WHEELS
Overall wheels - Car must have at least 4 wheels and 4 axles. Only three
wheels need to touch the track at a time.
- There
must be no less than 1 5/8" clearance between the inside edge of the wheels.
(remember the tracks center rail is 1 5/8" wide so make sure your wheels clear this width...) - No part
of the wheel that comes in contact with the track may be painted.
- Wheels
do not have to come from a kit but must be 31mm in diameter or smaller
- Wheels
may be constructed of plastic, rubber, or polyurethane.
- Wheel
hubs may be made of metal but may not come in contact with the track.
- Wheels
must be attached directly to the axle and must spin freely.
4. WEIGHTS - The builder can select the type of weighting material he/she chooses to bring the car up to weight
provided it is permanently attached to the car within the specified dimensions.
5. LUBRICANTS: - Lubricants
must be dry on the axle at race time. Wet, oily, or greasy axles are not allowed. Over-application
of lubricant which results in excessive shedding onto the track is not allowed. Approved lubricants include
(but are not limited to) graphite, Teflon, and Nyloil.
6. OTHER RULES AND NOTES:
Springs
are allowed. - Magnets are allowed.
- Your car cannot intentionally interfere with another lane.
- Starting or finish line devices are allowed.
- Electronic or lighting devices are allowed.
- Glass
or extremely fragile parts are forbidden.
- Paint that rubs
off, smudges or is extremely sticky is forbidden.
- Moving
weights or parts (other than the wheels) are allowed.
- Washers,
Bushings, Bearings or Inserts are allowed.
- Sharp objects
on the bottom of car. (We do not want any damage to the rubber stopping pads) are forbidden.
- Any part of the car to go beyond the starting peg is forbidden.
- Sticky substances or anything on the car to aid with the starting peg is forbidden.
- No Flames are allowed.
- No
damage can come to the track, and no harm can come to the spectators while watching the race.
- Pinewood cup directors reserve the right to disqualify or reclassify any car at their discretion.
The builder will be notified as to why the disqualification or reclassification occurred.
7. DISCLAIMER THE BUILDER AGREES TO
ABIDE BY THE TERMS, RULES AND REGULATIONS OF THIS EVENT. THE BUILDER UNDERSTANDS THAT THE OFFICIATORS OF
THE PINEWOOD CUP WILL BE AS CAREFUL AS POSSIBLE WITH THE BUILDERS CARS WHILE IN THE PINEWOOD CUP’S POSSESSION.
IF THE BUILDERS CARS ARE ACCIDENTALLY DAMAGED, LOST OR STOLEN IN THE PINEWOOD CUP’S CARE, THE PINEWOOD CUP WILL
NEGOTIATE UP TO A $25.00 RESTITUTION. THIS DOES NOT INCLUDE DAMAGE INCURRED DURING NORMAL RACING (SUCH
AS FLYING OFF THE TRACK, OR BEING HIT BY ANOTHER CAR). PINEWOOD CUP IS NOT RESPONSIBLE FOR ANY DAMAGE INCURRED
IN SHIPPING. THE BUILDER UNDERSTANDS THE ENTRY FEES ARE NOT REFUNDABLE IF THE BUILDERS CARS DO NOT PASS
CHECK IN. PINEWOOD CUP WILL SEND THE CAR BACK ALONG WITH AN EXPLANATION OF THE FAILURE. THE
BUILDER WILL STILL BE RESPONSIBLE FOR ALL RETURN SHIPPING COSTS. THE BUILDER PERMITS THE PINEWOOD CUP TO
WRITE AN IDENTIFICATION NUMBER ON THE BOTTOM OF THE CAR IN PERMANENT INK TO AID IN CAR IDENTIFICATION AMONG THOUSANDS OF OTHER
CARS. THE BUILDERS CAR’S PICTURES/VIDEOS/CAR NAMES MAY BE USED ON THE WEB AND OTHER PROMOTIONAL PURPOSES.
THE BUILDER WILL PACK THE CAR IN A STURDY BOX PADDED WITH BUBBLE WRAP OR SHIPPING POPCORN. THE BUILDER
WILL NOT USE EXCESSIVE TAPE WHILE PADDING THE CAR AS THIS MAY CAUSE DAMAGE WHEN THE PINEWOOD CUP ATTEMPTS TO OPEN THE PACKAGE.
THE BUILDER WILL INCLUDE THE CAR REGISTRATION INFO AND THE ENTRY FEE IN THE BOX WITH THE CAR UNLESS THE FEE WAS PAID
BY PAYPAL IN WHICH CASE THE PAYPAL RECEIPT WILL BE INCLUDED INSTEAD OF PAYMENT.
|