|
Probably the two most important things to remember when
trying to get a good finished paint job are sanding and priming. Any imperfection that you see before the paint is applied
will be seen with paint on it. Sand all rough spots until completely smooth. Consider using an orbital sander
or a Dremel tool sander to accomplish this. When priming, make sure it is over 60 degrees where you are painting and
paint in a well ventilated area. Apply several light coats, sanding with fine sand paper in between coats to achieve
the smoothest finish. Then apply your final paint colors in light coats also. Airbrushing allows more control
than spray cans for light coats.
|
